Take the role of a construction worker in 1899. Load supplies onto a wagon, drive to the site, and carry out real work — placing planks, hammering nails, hauling sacks, laying bricks — across multiple hand-crafted locations, each with its own wave sequence. The more tours you complete, the higher your level and the better your pay.

PREVIEW

Find a foreman NPC in towns across the map and interact with him to open the job selector. Browse available construction sites, see the pay per tour, and start when ready. Load crates onto the wagon, drive to the destination, then complete a series of work waves using unique animations and tools — hammer, plank, sack, brick, or box delivery. After all waves are done, return the wagon to the depot to get paid.

Features

3 Hand-crafted Locations (easily expandable)

Limpany, Pleasance, and Ewing Basin — each with unique coordinates, wave order, and workspot layout
Adding new locations requires only filling out a config block

Level System

Players level up as they complete tours, unlocking higher-tier construction sites
Each level has a configurable tours requirement and pay-per-tour amount
Level-up notifications and tour progress messages are fully toggleable
Progress is stored per-character in the database, auto-created on resource start

5 Work Types, Fully Configurable Wave Sequences

hammer, plank, sack, brick, and boxdrop — each with unique animations, carried props, and interaction logic
Wave order per location is defined entirely in config: waveOrder = { 'hammer', 'plank', 'sack', ... }

Wagon & Loading Phase

Configurable number of boxes to load before departure
Box load time limit with auto-cancel to prevent exploitation
Wagon monitoring during drive and return phases — players have 30 seconds to re-enter before mission fails
Visual crate stacking on the wagon during the loading phase

NPC Foremen

Multiple foremen across the map, each with configurable model, position, wagon spawn, and pickup zone
Per-NPC cooldown system prevents two players from using the same foreman simultaneously

Custom UI

Location selector with card layout, lock/unlock states, level requirement display, and pay preview
Smooth timecycle effect on selector open
Configurable countdown timer overlay (for wagon abandonment warning)

Framework & Interaction

RSG-Core and VORP auto-detected at runtime
RSG supports both ox_target and a built-in prompt system (toggle via Config.UsePromptSystem)
VORP uses the built-in prompt system automatically
fw_func.lua is open and structured — swap notifications, progress bars, or add custom logic
Optional lrc-pgbar integration for the timing minigame; falls back to a standard progress bar if absent

Full Localisation

English and Romanian included, all strings editable in locales/locale_init.lua

Installation: Drop in, configure, done.

Dependencies: oxmysql is the only actual requirement. RSG uses ox_lib / ox_target (both optional/replaceable). VORP uses vorp_progressbar (replaceable). lrc-pgbar optional for timing minigame.

[Asset Escrow System]
Script is protected using Cfx’s Asset Escrow system, you only have access to configuration files

-- ============================================================
--  LOCATIONS CONFIG
--  Locatons and NPC foremen.
--  Add new locations/missions here — 
--
--  UI CARD FIELDS (per city):
--    uiOrder      – Controls card order in the selector UI. 
--    uiLabel      – Display name shown on the card (ex "Limpany").
--    uiSub        – Subtitle shown on the card when unlocked (ex "Location available").
--    uiImage      – Path to the location preview image shown on the right panel.         
--    levelRequired – The player level required to access this mission.
--                   Pay shown on the card is auto-pulled from Config.LevelSystem.levels[levelRequired].pay.
-- ============================================================

Config.Cities = {

    -- ── MISSION 1: Limpany ──────────────────────────────────
    limpany = {
        -- UI card
        uiOrder       = 1,
        uiLabel       = 'Limpany',
        uiSub         = 'Location available',
        uiImage       = 'assets/m1.png',
        levelRequired = 1,

        destination = vector3(-376.64, -126.74, 46.01), 

        -- Wave order: Hammer → Plank → Sack → Brick → Plank | Control this as you like.
        waveOrder = { 'hammer', 'plank', 'sack', 'brick', 'plank' },

        WorkSpots1 = { -- hammer
            vector3(-383.42, -133.91, 48.36),
            vector3(-378.47, -141.95, 48.35),
            vector3(-387.38, -141.95, 48.36),
            vector3(-375.61, -135.98, 48.06),
            vector3(-377.30, -142.37, 48.16),
        },
        WorkSpots2 = { -- plank
            vector3(-364.69, -120.59, 47.51),
            vector3(-360.90, -121.36, 47.53),
            vector3(-354.05, -115.25, 47.86),
            vector3(-363.24, -111.81, 47.57),
            vector3(-370.46, -112.18, 45.97),
        },
        WorkSpots3 = { -- sack
            vector3(-371.57, -141.92, 48.36),
            vector3(-337.62, -124.98, 50.39),
            vector3(-344.76, -155.58, 50.70),
            vector3(-359.88, -140.33, 47.61),
            vector3(-372.97, -112.69, 46.16),
        },
        WorkSpots4 = { -- brick
            vector3(-331.40, -151.57, 50.99),
            vector3(-329.11, -147.39, 50.90),
            vector3(-326.38, -146.29, 50.94),
            vector3(-327.48, -147.47, 51.08),
            vector3(-323.97, -153.68, 51.08),
        },
        WorkSpots5 = { -- plank
            vector3(-320.91, -132.38, 51.20),
            vector3(-315.79, -131.44, 51.81),
            vector3(-317.54, -135.78, 51.39),
            vector3(-318.57, -128.23, 51.26),
            vector3(-320.92, -134.19, 51.11),
        },
    },

    -- ── MISSION 2: Pleasance ────────────────────────────────
    pleasance = {
        -- UI card
        uiOrder       = 2,
        uiLabel       = 'Pleasance',
        uiSub         = 'Location available',
        uiImage       = 'assets/m2.png',
        levelRequired = 2,

        destination = vector3(1767.6915, -439.6481, 46.7331),

        waveOrder = { 'sack', 'plank', 'brick', 'hammer', 'plank' },

        WorkSpots1 = { -- sack
            vector3(1739.8202, -462.9131, 47.6797),
            vector3(1743.7147, -466.1329, 47.7516),
            vector3(1769.5574, -472.6369, 45.1940),
            vector3(1781.6168, -462.3596, 44.7799),
            vector3(1750.6359, -416.7635, 48.0068),
        },
        WorkSpots2 = { -- plank
            vector3(1771.9274, -468.8380, 45.3030),
            vector3(1784.5370, -472.0982, 44.9537),
            vector3(1773.6807, -466.1415, 45.5901),
            vector3(1783.1281, -474.3506, 45.0597),
            vector3(1774.1052, -476.3369, 45.2000),
        },
        WorkSpots3 = { -- brick 
            vector3(1702.9774, -410.7193, 48.7690), 
            vector3(1705.1453, -410.4184, 53.7491),
            vector3(1739.3405, -413.9337, 52.6526),
            vector3(1782.7463, -397.4455, 51.6832),
            vector3(1781.7781, -474.4066, 51.6511),
        },
        WorkSpots4 = { -- hammer 
            vector3(1746.9457, -416.6886, 47.8694),
            vector3(1746.1682, -408.8139, 48.0446),
            vector3(1743.5787, -416.6436, 47.5697),
            vector3(1708.3293, -408.4095, 49.4588),
            vector3(1704.7905, -403.3052, 48.9860),
        },
        WorkSpots5 = { --plank
            vector3(1785.1713, -401.5957, 47.4558),
            vector3(1783.4893, -394.5448, 47.0291),
            vector3(1743.7014, -461.8596, 47.5244),
            vector3(1739.7805, -467.8582, 46.6687),
            vector3(1704.2087, -390.6011, 49.8788),
        },
    },


    -- ── MISSION 3: Ewing Basin ────────────────────────────────
    -- Wave order: Sack → Plank → Brick → Hammer → Plank
    ewingbasin = {
        -- UI card
        uiOrder       = 3,
        uiLabel       = 'Ewing Basin',
        uiSub         = 'Location available',
        uiImage       = 'assets/m3.png',
        levelRequired = 3,

        destination = vector3(-1895.3932, 1322.0270, 199.4042),

        waveOrder = { 'boxdrop', 'plank', 'sack', 'hammer', 'plank' },

        WorkSpots1 = { -- box 
            vector3(-1880.5869, 1319.9769, 201.5120),
            vector3(-1876.7612, 1329.7988, 202.2113),
            vector3(-1889.9679, 1331.0117, 200.1049),
            vector3(-1884.8862, 1352.9384, 203.2724),
            vector3(-1908.3969, 1347.2604, 202.0585),
        },
        WorkSpots2 = { -- plank
            vector3(-1906.0745, 1330.8090, 200.0544),
            vector3(-1910.3126, 1330.8002, 200.2375),
            vector3(-1931.6545, 1334.3488, 203.0575),
            vector3(-1938.9055, 1330.7987, 205.0754),
            vector3(-1901.3796, 1333.9407, 200.0972),
        },
        WorkSpots3 = { -- sack 
            vector3(-1904.6295, 1348.3533, 202.0377), 
            vector3(-1904.6295, 1348.3533, 202.0377),
            vector3(-1891.9789, 1364.2164, 203.8017),
            vector3(-1891.9789, 1364.2164, 203.8017),
            vector3(-1886.8160, 1335.4489, 200.6217),
        },
        WorkSpots4 = { -- hammer 
            vector3(-1893.0714, 1332.7729, 200.0972),
            vector3(-1898.0411, 1335.7745, 200.0972),
            vector3(-1875.8632, 1359.2015, 203.4139),
            vector3(-1875.6254, 1360.4982, 211.5148),
            vector3(-1874.7687, 1363.2653, 211.5219),
        },
        WorkSpots5 = { --plank
            vector3(-1896.7463, 1358.3610, 203.3496),
            vector3(-1899.5768, 1359.8938, 203.3418),
            vector3(-1914.7770, 1351.4546, 202.9318),
            vector3(-1915.6653, 1358.0844, 205.0929),
            vector3(-1921.7349, 1337.7711, 201.7639),
        },
    },


    -- ── HOW TO ADD A NEW MISSION ────────────────────────────
    -- Copy the block below, uncomment it, fill in the values.
    -- The card will appear automatically in-game
    --
    -- newcity = {
    --     uiOrder       = 3,                         -- card position in the list
    --     uiLabel       = 'New City',                -- card title
    --     uiSub         = 'Locatie disponibila',     -- card subtitle when unlocked
    --     uiImage       = 'assets/m3.png',           -- drop PNG in ui/assets/
    --     levelRequired = 3,                         -- pay auto-pulled from Config.LevelSystem.levels[3].pay
    --
    --     wagonSpawn  = vector4(0.0, 0.0, 0.0, 0.0),
    --     pickupZone  = vector3(0.0, 0.0, 0.0),
    --     destination = vector3(0.0, 0.0, 0.0),
    --
    --     waveOrder = { 'hammer', 'plank', 'sack', 'brick', 'plank' },
    --
    --     WorkSpots1 = { vector3(0,0,0), vector3(0,0,0), vector3(0,0,0), vector3(0,0,0), vector3(0,0,0) },
    --     WorkSpots2 = { vector3(0,0,0), vector3(0,0,0), vector3(0,0,0), vector3(0,0,0), vector3(0,0,0) },
    --     WorkSpots3 = { vector3(0,0,0), vector3(0,0,0), vector3(0,0,0), vector3(0,0,0), vector3(0,0,0) },
    --     WorkSpots4 = { vector3(0,0,0), vector3(0,0,0), vector3(0,0,0), vector3(0,0,0), vector3(0,0,0) },
    --     WorkSpots5 = { vector3(0,0,0), vector3(0,0,0), vector3(0,0,0), vector3(0,0,0), vector3(0,0,0) },
    -- },
}

-- ============================================================
--  NPC FOREMEN
-- ============================================================

Config.NPCs = { -- add/replace how you want
    saintdenis = {
        model      = 'u_m_m_bivforeman_01',
        coords     = vector4(2533.6863, -1502.1650, 45.9730, 4.4304), -- npc coords
        wagonSpawn = vector4(2537.7744, -1498.5179, 45.9734, 355.6565), -- wagon spawn
        pickupZone = vector3(2538.6865, -1502.1600, 45.9731), -- where boxes spawn to load the wagon.
    },
    strawberry = {
        model      = 'u_m_m_racforeman_01',
        coords     = vector4(-1821.8894, -427.7985, 159.9921, 79.3883),
        wagonSpawn = vector4(-1829.72, -432.65, 159.66, 155.90),
        pickupZone = vector3(-1825.48, -431.38, 159.83),
    },
    valentine = {
        model      = 'u_m_m_htlforeman_01',
        coords     = vector4(-259.0458, 627.4171, 113.4465, 135.8091),
        wagonSpawn = vector4(-264.3984, 625.6421, 113.1656, 148.8408),
        pickupZone = vector3(-265.4656, 631.0618, 113.3332),
    },
}